Key Features
Overview
The Kreg KDG-6000 Drilling Guide is a compact drilling guide jig built for woodworkers, installers, and serious DIY users who want straighter holes from a standard hand drill. This is a drilling guide designed for creating straight, accurately positioned holes in wood without using a drill press. Model Number: KDG-6000. If you regularly drill for screws, hardware mounting, or dowel joints, this guide gives you a simple way to clean up accuracy without adding a big setup to the bench.
What matters here is control. The guide uses six hardened steel drill guides in common sizes: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch, and 1/2 inch. That means the bit is supported where it enters the work, which helps keep the hole straight and helps reduce the bit skating off your mark at the start. For anyone doing repeat drilling or trying to keep holes square by hand, that is the whole game.
The built-in hole alignment marks are a practical touch, not filler. They help you line up the guide faster when you are drilling edge holes, centered holes, or hardware locations where placement matters. Kreg also built this guide to self-center on the edge of 1/2 inch and 3/4 inch material, which makes it especially useful for common board and plywood thicknesses. If you need a centered edge hole in those sizes, this saves measuring and second-guessing.
Its construction is straightforward and job-focused. The body is polymer for low weight and easy handling, while the actual drill guides are hardened steel where the wear happens. That combination keeps the tool light enough to grab for quick jobs but puts durability where the bit contacts the guide. At roughly a quarter pound, it is easy to keep in a toolbox, drawer, or joinery kit instead of treating it like a bench-only accessory.
GripMaxx anti-slip surfaces and the ergonomic shape also matter more than they sound like they should. When a drill guide shifts during startup, the hole ends up off target fast. The anti-slip surfaces help the guide stay planted on the material, and the compact shape is easy to hold while starting a hole cleanly. For handheld drilling in plywood, softwood, or hardwood, that added stability can mean less rework and cleaner results.
This Kreg drilling guide is best for woodworking, cabinet work, home projects, hardware installation, and simple joinery tasks where you need a portable drilling aid instead of a full shop machine. It is a smart fit for users who already own a hand drill and want better results from it. If you need a quick, portable way to drill straighter holes for fastening or dowel work, this is one of those small shop accessories that earns its space pretty quickly.
Get Drill Press Help Anywhere
This guide gives a hand drill a lot more discipline. Instead of trying to eyeball square drilling, you get a stable guide block that helps start and hold the bit on line.
- Six hardened steel drill guides support common bit sizes from 1/8 inch to 1/2 inch
- Designed to help create straight holes without using a drill press
Center Edge Holes Faster
On common stock sizes, this guide cuts down layout time. The self-centering design helps place edge holes where they belong on 1/2 inch and 3/4 inch material.
- Self-centers on the edge of 1/2 inch and 3/4 inch boards and plywood
- Built-in alignment marks help with repeatable hole placement
Compact Enough to Keep Close
This is the kind of jig you actually bring to the project instead of leaving on the shelf. It is light, simple, and useful across a lot of fastening and joinery work.
- Polymer body keeps weight low at about 0.25 lbs
- Ergonomic design and GripMaxx anti-slip surfaces improve control during startup
What’s in the Box
- (1) Drilling Guide
Key Specifications
| Tool Type | Drilling Guide Jig |
|---|---|
| Material | Polymer body with hardened steel drill guides |
| Guide Sizes | 1/8 in, 3/16 in, 1/4 in, 5/16 in, 3/8 in, 1/2 in |
| Self-Centering Capacity | 1/2 in and 3/4 in material |
| Overall Size | 4.75 in x 1.5 in x 0.97 in |
| Weight | 0.25 lbs |
Built For
Pro Tip
When you are drilling centered edge holes in 1/2 inch or 3/4 inch stock, let the self-centering body do the setup work first, then use the alignment marks to keep repeat holes consistent from part to part. It is a quick way to speed up dowel and hardware prep without chasing measurements every time.
Warranty & Support
Tool Nut’s Take
Why the Kreg KDG-6000 Drilling Guide punches above its size
This is a small, inexpensive jig that solves a very real problem: getting straight, centered holes with a hand drill when a drill press is not part of the plan.
- Who it’s for: Woodworkers, cabinet installers, and DIY users who want cleaner drilling for screws, hardware, and dowel joints.
- Why it stands out: The six hardened steel guide sizes, self-centering design for 1/2 inch and 3/4 inch stock, and anti-slip grip make it more useful than a basic block-style guide.
- Worth knowing: You are getting the guide only, so it is best for users who already have the drill bits and hand drill they want to use with it.
Common Questions
- What kind of tool is this? It is a drilling guide jig made to help you drill straight, accurately positioned holes with a hand drill.
- What hole sizes does it support? It includes six hardened steel drill guide sizes: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch, and 1/2 inch.
- Does it center itself on board edges? Yes. It self-centers on the edge of 1/2 inch and 3/4 inch material.
- What jobs is it good for? It is suited for screw holes, mounting hardware, dowel joints, and general woodworking drilling where straight holes matter.
Reviews
There are no reviews yet.