Key Features
Overview
The Kreg KDRV-FLIP Quick-Flip is a dual-action drill and driver accessory built for fast wood fastening with Kreg screws. This is a drill/driver bit set designed for drilling a pilot hole and counterbore on one end, then driving the screw on the other. Model Number KDRV-FLIP. If you build cabinets, install drawer fronts, or knock out face-joint work regularly, this tool cuts down the usual bit swapping and keeps the process moving.
What makes this one useful is the sequence. One side drills the pilot hole and creates a flat-bottom counterbore sized for the screw head. Flip it around in the quick-release housing and the other side gives you a square-drive bit for driving the fastener. In practical terms, that means you can go from prep to fastening with one accessory instead of juggling a drill bit, countersink, and driver bit every few screws.
Kreg positions the Quick-Flip for more than just pocket-hole work. It is well suited for face-joining corners, attaching false drawer fronts, and other wood joinery where you want a strong mechanical connection and a screw that sits cleanly in the workpiece. Kreg screws are already a go-to for a lot of shop and install work, and this accessory is built around making those screws faster and easier to use in common assembly tasks.
The design is straightforward in a good way. The double-ended insert sits in a quick-release housing that chucks into any drill, and the 1/4 inch hex shank makes it easy to move between cordless drills and impact drivers. The body is compact, the grip area is easy to handle, and the quick-release setup makes flipping between operations simple when you’re working one-handed at the bench or on site.
Another detail that matters is adjustable pilot-hole drilling depth. That gives you more control over how the bit is set up for different material thicknesses and fastening tasks. If you’re working with different stock sizes, that adjustability helps you dial in cleaner results instead of relying on a one-depth-fits-all accessory.
The Kreg KDRV-FLIP Quick-Flip is impact rated, so it is a better fit for real-world fastening than a light-duty accessory that only belongs in a drawer. The bi-metal construction on the bit side also supports durability where it counts. For anyone doing repetitive wood fastening, especially with Kreg screws, that combination of convenience and toughness is what makes this tool worth having around.
Who should buy it? Cabinet installers, finish carpenters, shop woodworkers, remodelers, and serious DIY users who already use Kreg screws will get the most out of it. If your work involves small assemblies, casework, trim-related fastening, or quick face joints, this accessory saves time every single time you reach for it.
Faster Wood Fastening With Fewer Bit Changes
The whole point of this accessory is speed without slop. Instead of switching between separate tools for pilot drilling and driving, you flip the insert and keep going.
- One end is a square-drive bit for Kreg screw driving
- Quick-release housing keeps the transition simple
- Built to create strong, simple joints with Kreg screws
Get A Pilot Hole And Counterbore In One Step
The drill side is sized to prep for Kreg screws properly, not just poke a hole and hope for the best. That helps the screw seat cleaner and reduces the chance of rough-looking results on visible work.
- Drills a pilot hole plus a flat-bottom counterbore
- Designed so the screw head fits into the counterbore correctly
- Useful for face joints, drawer fronts, and other clean assembly work
Easy To Run In Any Standard Drill Setup
You do not need a special platform to use it. The 1/4 inch hex shank and double-ended insert make it easy to drop into the tools you already carry.
- 1/4 in hex shank fits common drill and driver chucks
- Double-ended insert keeps both functions in one compact accessory
- Impact-rated construction makes it more job-friendly than a light-duty specialty bit
What’s in the Box
- (1) Quick-Flip driver housing
- (1) Drill bit / pilot-hole and counterbore insert
- (1) 1 in square-drive bit
Key Specifications
| Bit Material | Bi-Metal |
|---|---|
| Drive Design | Square |
| Shank Size | 1/4 in hex |
| Weight (lbs) | 0.13 lbs |
| Tools Included | 3 |
| Construction | Impact rated |
Compatibility
Built For
Pro Tip
Set the pilot-hole depth before you start a run of parts, especially on drawer fronts or face joints where thickness can change the screw seating. Taking a minute to dial that in gives you more consistent flush results and saves rework.
Warranty & Support
Tool Nut’s Take
Small Accessory, Real Time Saver
The Kreg KDRV-FLIP Quick-Flip is the kind of shop accessory that earns its spot fast because it trims steps out of repetitive wood fastening work.
- Who it’s for: Woodworkers, cabinet guys, trim carpenters, and DIY users who already use Kreg screws and want cleaner, faster assembly.
- Why it stands out: You get pilot drilling, counterboring, and square-drive fastening in one compact impact-rated setup that fits a standard 1/4 inch hex interface.
- Worth knowing: This is a specialty accessory built around Kreg screw work, so it makes the most sense if that fastening system is already part of your workflow.
Common Questions
- What does the Kreg KDRV-FLIP Quick-Flip do? It drills a pilot hole and counterbore on one end, then flips to a square-drive bit for driving Kreg screws.
- Will it fit a standard drill or driver? Yes. It uses a 1/4 in hex shank and is designed to chuck into standard drills and drivers.
- Is it made for impact driver use? Yes. The Quick-Flip is listed as impact rated.
- What kind of work is it best for? It is especially useful for face-joining corners, attaching false drawer fronts, and other wood joinery tasks using Kreg screws.
Reviews
There are no reviews yet.