Key Features
Overview
The Makita XNB01Z 18V LXT Lithium-Ion Cordless 2″ Brad Nailer, 18 Ga., Tool Only is built for finish fastening jobs where a hose gets in the way and speed matters. This is a cordless brad nailer designed for installing narrow trim and molding. Model Number XNB01Z. If you already run Makita 18V LXT batteries, this gives you a clean way to handle trim, punch-list work, and interior finish tasks without setting up a compressor.
This 18 gauge nailer drives brad nails from 5/8 inch to 2 inches, which gives it a useful range for light trim attachment, small moldings, and similar finish applications. Makita rates the magazine for up to 100 nails, so you get decent capacity before reloading. On a 5.0Ah 18V LXT battery, it can drive up to 1,660 nails per charge under Makita’s stated test conditions, which is the kind of runtime that makes a cordless nailer practical instead of just convenient.
What makes this tool more useful on real trim work is the control it gives you. The 2-mode selector switch lets you choose the nailing operation that fits the job, and the tool-free depth adjustment makes it easier to dial in a flush or slight countersink finish without breaking your rhythm. That matters when material changes from soft pine trim to denser stock and you want the head set consistently without chewing up the face.
Makita also built in the small stuff that actually helps during a long day. The anti-dry fire mechanism is there to prevent blank firing and reduce the chance of marking up the work surface when the magazine runs low. A built-in LED light helps when you are working inside cabinets, closets, hallways, or any other poorly lit finish space. The battery gauge gives you a quick read on charge level so you are less likely to get caught halfway through a run.
From a design standpoint, the XNB01Z stays compact at 11-5/8 inches long, and Makita lists the weight at 7.7 pounds with battery. That does not make it featherweight, but it is manageable for trim work and easier to move around with than a compressor-and-hose setup. The rubberized soft grip helps with control, and the rubber bumpers help protect both the tool and finished surfaces when you are working around painted trim or installed millwork.
This Makita cordless nailer runs on the Makita 18V LXT battery platform and is compatible with Makita 18V Lithium-Ion batteries that have the Star symbol. It also uses Makita’s Star Protection Computer Controls to help protect against overloading, over-discharging, and overheating. For buyers already in the LXT system, that is a real advantage because the nailer drops into an existing battery and charger setup instead of forcing you into another platform.
Who should buy it? This is a strong fit for finish carpenters, remodelers, cabinet installers, and serious DIY users doing interior trim and molding work. If most of your day is base, casing, small trim, and repair work, the Makita XNB01Z 18V LXT Lithium-Ion Cordless 2″ Brad Nailer, 18 Ga., Tool Only makes a lot of sense. If you need a hose-free nailer for heavier fastening or larger finish nails, you will want to step up to a different nail type, but for 18 gauge brad work this one is built around control, portability, and system convenience.
Compact for Finish Work
This nailer is sized for the kind of work where a bulky tool slows you down. The compact body helps when you are moving around installed trim, inside room corners, or along cabinet face frames.
- Overall length is 11-5/8 inches
- 18 gauge format is suited to finish fastening and detail work
Dial In the Finish
For trim work, clean results matter more than raw speed. The tool-free depth adjustment and selectable firing modes make it easier to match the tool to the material and the pace of the job.
- Tool-free depth adjustment for flush or countersink results
- 2-mode selector switch for nailing control
What’s in the Box
- (1) Makita XNB01Z 18V LXT 18 Gauge Cordless 2 inch Brad Nailer
Battery and charger are sold separately.
Key Specifications
| Voltage (V) | 18V |
|---|---|
| Nailer Type | Brad Nailer |
| Nail Size Range | 5/8 in. to 2 in. (18 gauge) |
| Maximum Magazine Capacity | 100 nails |
| Weight (lbs) | 7.7 lbs. with battery |
| Dimensions (L x W x H) | 11-5/8 in. x 3-13/16 in. x 12-1/2 in. |
| Motor Type | Brushed |
| Made In | Japan |
Compatibility
Built For
Pro Tip
Use the selector switch to stay in the control mode you need for the task. Sequential firing is the better call for visible trim where placement matters, while the faster mode makes more sense when you are running repetitive fastening on longer pieces.
Warranty & Support
Tool Nut’s Take
Makita XNB01Z 18V LXT Lithium-Ion Cordless 2″ Brad Nailer, 18 Ga., Tool Only Keeps Trim Work Mobile
This is a practical cordless finish nailer for guys who want to leave the hose and compressor in the truck and still get clean, controlled brad fastening.
- Who it’s for: Finish carpenters, remodelers, cabinet installers, and serious DIY users already running Makita 18V LXT batteries.
- Why it stands out: Good nail range, useful runtime, depth control, anti-dry fire protection, and true platform value if you are already on LXT.
- Worth knowing: This is a bare tool, so you need a compatible battery and charger, and it is built specifically for 18 gauge brad work, not heavier finish fastening.
Common Questions
- What fasteners does it use? It is designed for 18 gauge brad nails from 5/8 inch to 2 inches.
- Does it run on the Makita 18V LXT system? Yes. It uses Makita 18V LXT Lithium-Ion batteries, and Makita specifies compatibility with batteries that have the Star symbol.
- Does it have depth adjustment? Yes. It has tool-free depth adjustment for flush and countersink finish control.
- Is there a work light on the tool? Yes. The XNB01Z includes a built-in LED light to illuminate the work area.
Reviews
There are no reviews yet.