Key Features
Overview
The Festool Suction Hose D36x5m-AS/CTR is a 36 mm antistatic suction hose built for dust extraction and shop cleaning with compatible Festool CT dust extractors. This is a suction hose designed for dust extraction and cleaning tasks. Model Number 204925. If you want better reach, less hose drag, and a more secure connection at the extractor or tool, this is the upgrade that matters.
The big story here is handling. Festool built this hose with a smooth outer skin so it slides instead of snagging on corners, sheet goods, bench legs, and jobsite clutter. On paper that sounds simple. In real use, it means less interruption when you are moving around a work area and less wear from the hose getting caught and yanked.
Inside, the hose is extremely elastic for better flexibility over a full 5 m, or 16.4 ft, run. That extra reach is useful when the extractor stays parked while you work a bench, clean a larger room, or move around a machine setup. The 36 mm diameter also makes sense for higher-volume debris and general cleanup where a narrower hose can feel restrictive.
The CLEANTEC extraction sleeve is another jobsite-friendly detail. It uses a bayonet fitting to secure the connection between the hose and the power tool, helping keep the hose attached when you reposition the tool or pull around obstacles. Festool also lists a rotating adapter and connector, which helps reduce hose twist during use.
For day-to-day durability, this hose is antistatic and temperature-resistant up to 158 degrees Fahrenheit, or 70 degrees Celsius. Antistatic design helps reduce dust buildup on the outside of the hose and can help prevent static discharge or shocks. If you work in a shop where fine dust gets everywhere, that is not a throwaway feature. It helps keep the hose cleaner and makes the whole setup more pleasant to use.
Compatibility is straightforward. Festool lists this hose as suitable for cleaning tasks with CT dust extractors and specifically for the CT 26, CT 36, and CT 48. It also includes an RFID chip for automatic suction hose detection, which adds system integration within compatible Festool extraction setups.
Who is this for? Woodworkers, remodelers, installers, cabinet guys, and serious DIY users already working in the Festool dust extraction system. It is also a good fit for anyone who spends real time cleaning up with a CT extractor and wants a hose that moves easier and stays connected better than a basic hose. If your extractor is part of your daily workflow, a better hose is not an accessory you notice once. It is something you notice all day.
Move Easier During Cleanup
For cleanup work, hose handling is half the battle. The Festool Suction Hose D36x5m-AS/CTR is built to drag smoothly across the floor and around the shop so the extractor works with you instead of fighting you.
- 5 m length gives more working range for larger rooms and shop spaces
- Smooth outer skin helps prevent the hose from getting caught on edges and obstacles
Secure Connection at the Machine
A loose hose connection is annoying when you are in the middle of a cut or moving between stations. The CLEANTEC sleeve and bayonet fitting give this hose a more secure connection where it counts.
- CLEANTEC extraction sleeve is designed to connect the hose and power tool securely
- Rotating adapter and connector help reduce hose twist while working
Festool Suction Hose D36x5m-AS/CTR Build Details
Festool Suction Hose D36x5m-AS/CTR Build Details
This hose is built for daily use, not occasional cleanup. The antistatic construction, elastic hose body, and durable outer surface are the details that make it hold up better in real shop conditions.
- 36 mm diameter supports strong airflow for extraction and cleaning tasks
- Temperature-resistant to 158 degrees Fahrenheit, or 70 degrees Celsius
What’s in the Box
- (1) Festool Suction Hose D36x5m-AS/CTR
Key Specifications
 Model Number | 204925 |
|---|---|
 Diameter | 36 mm (1-1/16 in.) |
 Length | 5 m (16.4 ft) |
 Material | Polyethylene (PE) |
 Temperature Resistance | Up to 158 °F (70 °C) |
 Bleeder Resistor | < 1 MΩ/m |
 Color | Gray |
 Made In | Germany |
Compatibility
Built For
Pro Tip
If you are using your CT extractor for both machine collection and general cleanup, the 36 mm hose is the better choice when debris volume starts to build. It gives you the reach and airflow for cleanup without feeling as restrictive as a smaller hose.
Warranty & Support
Tool Nut’s Take
A Better Hose Makes the Whole Extractor Better
The Festool Suction Hose D36x5m-AS/CTR is the kind of upgrade you feel every time you move around the shop, especially if your current hose likes to snag, twist, or pull loose.
- Who it’s for: Festool CT extractor users who do regular cleanup or want a more capable dust extraction hose for day-to-day work.
- Why it stands out: The smooth outer skin, antistatic build, long 5 m reach, and CLEANTEC bayonet connection solve real annoyances that cheaper hoses never quite fix.
- Worth knowing: This is a premium hose and it is best suited to users already in the Festool extraction system, especially CT 26, CT 36, and CT 48 owners.
Common Questions
- What size is this suction hose? It has a 36 mm diameter and a 5 m length, which is about 16.4 ft.
- Which Festool dust extractors is it listed for? Festool lists it for cleaning tasks with CT dust extractors and specifically for the CT 26, CT 36, and CT 48.
- Is this hose antistatic? Yes. Festool identifies it as an antistatic suction hose.
- How does the hose connect? It uses a CLEANTEC extraction sleeve with a bayonet fitting, along with a rotating adapter and connector.
Reviews
There are no reviews yet.