Kreg 20V 2.6 gal. Cordless Wet/Dry Vacuum with HEPA, Tool Only (KPTWDV026B)

The Kreg 20V Ionic Drive Wet/Dry Vac with HEPA (Tool Only) is a cordless wet/dry vacuum built for dust collection and cleanup in shops, garages, and active jobsites. This is a wet/dry vacuum designed for collecting fine dust, dry debris, and liquid messes while also supporting connected tool cleanup. Model Number: KPTWDV026B. If you already run Kreg 20V Blue Ion batteries, this bare-tool setup gives you a compact cleanup solution without paying again for a battery and charger.

What makes this vac matter is the mix of portability and real filtration. Kreg rates it at 50 CFM, which puts it in the useful zone for sanding dust, sawdust, bench cleanup, and general debris pickup. The HEPA-rated filter captures 99.97% of particles down to 0.3 microns, so this is not just about making the floor look cleaner. It helps control the fine dust that ends up in the air, on your tools, and in the rest of the workspace.

The two-speed brushless motor is a practical feature, not fluff. High speed gives you stronger suction when you are cleaning up heavier debris or pulling dust from a connected tool. Low speed helps stretch runtime when you are doing lighter cleanup or moving from station to station. On a cordless vac, that control matters because it lets you choose between maximum pickup and longer use on the same battery.

Kreg also built this unit around actual shop use. The 2.6-gallon capacity keeps the vac compact enough to carry and store without taking over the bench, but it still gives you room for routine cleanup before you need to dump it. The 7-foot hose means you can leave the vac on the floor or bench and still reach tools, shelves, corners, and floor areas without dragging the whole unit every few feet. That is a bigger deal than it sounds once you start cleaning under benches, around carts, or inside a vehicle.

For dust collection, the universal connector fits 1-1/4 inch and 36 mm tool ports. That broadens the usefulness of the vac beyond one brand. If you are sanding, cutting, or routing with tools that use either of those common connection sizes, this vac is set up to work as part of the process instead of just being the thing you grab after the mess is already made. That makes it a better fit for controlled cleanup and light source extraction than a basic handheld vacuum.

Versatility is another strong point here. This is a true wet/dry vacuum, so it handles dry dust and debris as well as liquid spills. It also converts to a blower function, which gives it more value for quick outdoor cleanup, clearing benches, or blowing debris out of awkward spots. Kreg includes a flexible hose, crevice tool, utility nozzle, and a three-size inflator nozzle setup, so the unit is ready for more than one kind of task right out of the box.

From a design standpoint, this is aimed at users who need something smaller and easier to move than a traditional shop vacuum. The onboard accessory storage keeps the hose and nozzles from getting separated, and the compact cordless form factor makes more sense in tight workshops, garages, and punch-list work than a large wheeled canister. At 6.4 lbs, it is light enough to carry with one hand between a bench, vehicle, and work area.

If you are a woodworker, remodeler, installer, or serious DIYer who wants cleaner cuts, less airborne dust, and faster end-of-day cleanup, this vac makes sense. If you need whole-house jobsite extraction or sustained high-volume collection from large tools, you will still want a bigger dedicated dust extractor or full-size shop vac. But for portable cleanup, connected small-tool dust collection, and everyday mess control, this Kreg unit hits a very useful middle ground.

Kreg 20V Ionic Drive Wet/Dry Vac with HEPA (Tool Only) is the smart grab-and-go shop vacuum

This is the kind of cordless vac that makes a lot of sense for guys who want better dust control without hauling a full-size canister around the shop.

• Who it’s for: Woodworkers, remodelers, installers, and serious DIYers who want portable wet/dry cleanup and light tool-connected dust collection.
• Why it stands out: The combination of HEPA filtration, 50 CFM suction, universal hose fit, and blower conversion gives it more real shop value than a basic cordless vacuum.
• Worth knowing: This is a bare tool, so you need a compatible Kreg 20V Blue Ion battery and charger. It is best for portable cleanup and smaller dust collection jobs, not replacing a large extractor for heavy continuous use.

• Is this a wet/dry vacuum? Yes. It is designed for both dry debris and liquid cleanup, and it can also convert to a blower.
• What battery system does it use? It is compatible with Kreg 20V Blue Ion batteries.
• Can it connect to power tools for dust collection? Yes. The universal connector fits 1-1/4 inch and 36 mm tool ports, which makes it suitable for Kreg tools and many other compatible power tools.
• Does it use a brushless motor? Yes. It has a two-speed brushless motor for efficiency and runtime control.