Milwaukee 2912-22 M18 FUEL 1″ SDS Plus Rotary Hammer 6.0Ah Kit

Key Features Fast Concrete Drilling The Milwaukee 2912-22 M18 FUEL 1″ SDS Plus Rotary Hammer Kit is built to move through concrete quickly with 2 ft-lbs of impact energy, 1,330 RPM, and 4,800 BPM. That means faster anchor holes and less waiting between holes on repetitive work. Better Control AUTOSTOP kickback control senses a bind-up and shuts the tool down, while the AVS anti-vibration system helps keep the tool more comfortable in your hands during overhead or repeated drilling. Jobsite-Ready Kit You get the rotary hammer, two 6.0Ah HIGH OUTPUT batteries, a rapid charger, and a carrying case. It is ready for concrete drilling work right out of the box instead of being another bare tool purchase. Overview The Milwaukee 2912-22 M18 FUEL 1″ SDS Plus Rotary Hammer Kit is a cordless concrete drilling tool for users who need real rotary hammer performance without dragging out a cord. This is a rotary hammer designed for drilling anchor holes, boring into concrete, and handling light chiseling tasks on commercial and residential jobs. Model Number: 2912-22. If you are an electrician, plumber, HVAC installer, maintenance tech, or general contractor drilling into concrete block, poured concrete, or hard aggregate, this kit is aimed right at you. On paper, the numbers are what make this one matter. The POWERSTATE brushless motor delivers 2 ft-lbs of impact energy, up to 1,330 RPM, and 4,800 BPM. In real use, that translates to faster hole drilling and better pace when you are setting anchors, hanging strut, mounting brackets, or drilling repeated 3/8 inch holes. Milwaukee calls it the fastest drilling rotary hammer in its class, and the runtime claim backs up the jobsite focus too: up to 125 holes at 3/8 inch x 2 inch per charge when paired with the included M18 HIGH OUTPUT XC6.0 battery. This kit uses a 1 inch SDS Plus chuck, which is the right setup for common concrete drilling and light chipping work. The three operating modes make the tool more useful than a one-trick concrete drill. You can run it in rotary hammer mode for drilling into masonry and concrete, hammer-only mode for light chipping, or rotary-only mode when the application calls for straight rotation. That gives the tool enough range for day-to-day service work instead of locking you into one kind of task. Milwaukee also put real attention into control. AUTOSTOP kickback control is a feature a lot of guys appreciate once they hit rebar or a tough bind-up. Instead of the tool trying to twist your wrist around, it electronically senses the bind and shuts the tool off. That matters most when you are drilling awkward angles, overhead, or from a ladder. The AVS anti-vibration system helps cut down the beat-up feeling you get after a run of holes, which is a big deal on longer install days. From a design standpoint, this is clearly built for jobsite use. The drop motor layout keeps the package compact at 11.5 inches long, and the side handle can rotate 360 degrees so you can set up for wall work, floor work, or tight approach angles. Milwaukee also calls out an LED light to help illuminate the drilling surface, which is a simple feature but one you notice in mechanical rooms, basements, and service spaces. There is also a connection port for the 2912-DE dedicated dust extractor, which matters if you are trying to keep cleanup down or work toward OSHA Table 1 dust compliance. As part of the M18 system, the Milwaukee 2912-22 M18 FUEL 1″ SDS Plus Rotary Hammer Kit fits into a battery platform a lot of crews already own. The included two M18 REDLITHIUM HIGH OUTPUT XC6.0 battery packs give you serious runtime, and Milwaukee states those packs provide more power and run cooler than standard M18 XC batteries. The included M18 and M12 rapid charger is another practical win because it supports both Milwaukee cordless platforms instead of taking up space with a single-purpose charger. Who should buy it? If your work regularly involves concrete drilling but you do not need to step up to a larger SDS Max rotary hammer, this is the sweet spot. It is especially well suited for trade pros drilling anchor holes, mounting hardware, hanging pipe and conduit supports, or doing punch-list and service work where portability matters. For serious DIY users doing basement finishing, masonry fastening, or renovation work, it is also a strong pick if you want pro-level speed and safety features instead of settling for a hammer drill that struggles in concrete. Ready for Real Concrete Work This kit gives you the core setup most users actually need on day one: the rotary hammer, two high-output batteries, a rapid charger, and a hard case. That makes it a strong fit for crews that need cordless drilling speed without piecing a system together one part at a time. Includes two M18 REDLITHIUM HIGH OUTPUT XC6.0 battery packs for longer runtime between charges Hard case helps protect the tool and keep the charger and batteries together in the truck or on the site What’s in the Box (1) M18 FUEL 1″ SDS Plus Rotary Hammer (2912-20) (2) M18 REDLITHIUM HIGH OUTPUT XC6.0 Battery Packs (48-11-1865) (1) M18 & M12 Rapid Charger (48-59-1808) (1) Carrying Case (1) Side Handle (1) Depth Rod (1) Grease Tube Dedicated dust extractor sold separately. Key Specifications Battery Platform M18 Chuck Type SDS Plus Chuck Size 1 in No-Load Speed 1,330 RPM Blows Per Minute 4,800 BPM Impact Energy 2 ft-lbs Tool Weight 6.8 lbs Weight with Battery 8.9 lbs Compatibility Battery Platform Works on the Milwaukee M18 battery system. Bit Interface Uses SDS Plus accessories for concrete drilling and light chipping applications. Dust Extraction Connection port supports the Milwaukee 2912-DE dedicated dust extractor. Dust extractor is sold separately. Charger Support Includes an M18 and M12 rapid charger, useful for users running both Milwaukee cordless platforms. Built For Construction Electrical Plumbing HVAC Concrete Drilling Anchor Setting Remodeling General Contracting Pro Tip If you are drilling a lot of repeat anchor holes, set the depth rod once and leave it there. It speeds up layout work, keeps hole depth consistent, and helps you take full advantage of this rotary hammer’s speed instead of stopping to check every hole. Warranty & Support 5 Year warranty on the tool and 3 Year warranty on the batteries. Tool Nut’s Take Tool Nut’s Take Why the Milwaukee 2912-22 M18 FUEL 1″ SDS Plus Rotary Hammer Kit earns truck space This is the kind of cordless rotary hammer that makes sense for the guy who drills concrete often enough to need real speed, but not so heavily that he wants to jump to a bigger and heavier SDS Max setup. Who it’s for: Pros doing anchor drilling, pipe and conduit support installs, service work, and punch-list concrete drilling. Why it stands out: Strong speed numbers, AUTOSTOP kickback control, reduced vibration, and a complete kit with two 6.0Ah batteries and a rapid charger. Worth knowing: Dust extraction is available, but the dedicated extractor is sold separately. If you are working indoors a lot, plan for that from the start. Common Questions Is this a hammer drill or a rotary hammer? This is a rotary hammer designed for concrete drilling and light chiseling applications. What bit style does it use? It uses SDS Plus accessories and has a 1 inch SDS Plus chuck. Does it include batteries and a charger? Yes. The kit includes two M18 REDLITHIUM HIGH OUTPUT XC6.0 batteries and one M18 and M12 rapid charger. Does it have kickback control? Yes. It features AUTOSTOP kickback control that electronically senses a bind-up and shuts the tool off. Is the dust extractor included? No. The dedicated dust extractor is sold separately.