Key Features
Overview
The Mirka Paint Cup System 125 µm Filter Lid, Model 9190170650, is a disposable paint cup system built for spray gun setup, paint mixing, and paint application. This is a paint cup system designed for spray finishing and refinishing work. If you want a cleaner, faster way to mix material, mount it to a spray gun, and keep moving through prep and spraying without fighting cleanup, this system is aimed right at that job.
What matters here is that this is not just a loose cup or a replacement lid. It is a complete Mirka system that includes 50 disposable liners and lids with a 125 µm filter, 20 stoppers, 1 rigid outer cup, and 1 retaining ring. In practical terms, that gives painters a ready-to-use setup for repeated spray sessions while keeping the working cup disposable where it counts. The 125 µm filter helps catch contamination before material reaches the gun, which is a real advantage when finish quality matters.
The design is straightforward and job-focused. The rigid outer cup supports the liner during mixing and spraying, while the retaining ring secures the assembly. That kind of setup helps keep handling simple at the bench and at the booth. For shops trying to stay organized, a disposable liner system also cuts down on wash-up compared to reusing traditional hard cups for every batch.
Mirka also calls out that all parts are resistant to corrosion from paint and thinner. That matters because cup systems live around aggressive materials, not clean showroom conditions. If a system cannot handle regular exposure to coatings and solvent, it becomes a weak link fast. This one is built with that real-world environment in mind.
For compatibility, the system is intended to mount on a spray gun, but the adapter must be purchased separately. That is an important buying detail. If you are setting up a new spray gun or replacing an older cup system, make sure you have the correct adapter for your gun before you start. Once paired properly, this type of setup is well suited to consistent material handling and cleaner workflow in automotive refinishing and similar paint applications.
Who should buy it? Painters, body shops, refinishing techs, and serious DIY users doing spray work will get the most from it. If you spray often enough to care about cleaner material flow, faster changeovers, and less cleanup between colors or products, this Mirka paint mixing and spray cup system makes sense. If you only spray once in a while, it still has value, but the biggest payoff shows up in repeat-use shop environments where time and finish quality both matter.
Keep Material Cleaner Before It Hits the Gun
The filter lid does real work here. By filtering material at 125 µm before it feeds into the spray gun, the system helps reduce contamination that can interrupt flow or show up in the finish.
- 125 µm filtered lid for paint preparation and spraying
- Designed as a spray gun-mounted cup system with adapter sold separately
Work Faster With a Disposable Cup Setup
Disposable liners make more sense the more often you spray. They simplify mixing and changeover, and they cut back on the cleanup that slows painters down between materials or colors.
- Includes 50 disposable liners and lids for repeated spray sessions
- Includes 20 stoppers to help manage leftover material between steps
Made to Hold Up Around Paint and Thinner
This system is built around the pieces painters actually handle every day. The rigid outer cup adds support, the retaining ring locks the setup together, and the components are resistant to corrosion from paint and thinner.
- Includes 1 rigid outer cup and 1 retaining ring
- All parts are resistant to paint and thinner corrosion
What’s in the Box
- (50) Disposable liners and lids with 125 µm filter
- (20) Stoppers
- (1) Rigid outer cup
- (1) Retaining ring
Spray gun adapter is sold separately.
Key Specifications
| Product Type | Disposable paint cup system |
|---|---|
| Filter Size | 125 µm |
| Liner and Lid Quantity | 50 |
| Stopper Quantity | 20 |
| Outer Cup Included | 1 rigid outer cup |
| Retaining Ring Included | 1 |
| Spray Gun Adapter | Required, sold separately |
| Chemical Resistance | Resistant to paint and thinner corrosion |
Compatibility
Built For
Pro Tip
Before ordering, match the adapter to your exact spray gun so the Mirka cup system becomes a true grab-and-go setup. The cup system is complete, but it will not mount correctly without the right adapter.
Tool Nut’s Take
Mirka Paint Cup System 125 µm Filter Lid keeps spray work cleaner and less annoying
This is the kind of setup that earns its keep by reducing mess, cutting cleanup, and helping painters keep bad material out of the gun.
- Who it’s for: Painters, body shops, and refinishing users who spray often enough to care about workflow and finish quality.
- Why it stands out: You get a full disposable cup system with filtered lids, stoppers, a rigid outer cup, and a retaining ring instead of piecing everything together one part at a time.
- Worth knowing: The adapter is not included, so make sure your gun is covered before you check out.
Common Questions
- What is the filter size? This Mirka paint cup system uses a 125 µm filter lid.
- Does it include a spray gun adapter? No. The adapter must be purchased separately.
- Is this a complete cup system or just replacement lids? It is a complete system that includes disposable liners and lids, stoppers, a rigid outer cup, and a retaining ring.
- Can the parts handle paint and thinner? Yes. Mirka states that all parts are resistant to corrosion from paint and thinner.
Reviews
There are no reviews yet.