Mirka Abranet 2-3/4 in. x 10 yd. 240 Grit Mesh Grip Sanding Roll for Dust-Free Sanding (9A-570-240)

Mirka 9A-570-240 Abranet 2-3/4″ x 10yd Mesh Grip Roll is a fine-grit abrasive roll for sanding and surface prep. This is a mesh abrasive roll designed for finish sanding, paint prep, and smoothing a wide range of materials. Model Number: 9A-570-240. If you need a cut-to-length sanding abrasive for hand sanding or custom-length applications, this format gives you more flexibility than standard sheets.

The 240 grit rating puts this roll in the range most users reach for when the job is refinement rather than heavy stock removal. It is a practical choice for final smoothing on wood, sanding primer, feathering paint edges, and prepping surfaces before topcoat. Because it uses aluminum oxide abrasive, you are getting a common, proven grain for consistent sanding across wood, metal, fillers, and coatings.

One of the big reasons people buy Abranet is the mesh construction. Instead of a solid paper backing, this product uses a polyamide mesh backing that stays flexible and easy to cut to the length you need. That matters when you are working with sanding blocks, detail work, narrow surfaces, or shop setups where pre-cut pieces do not fit the task. The roll format also helps reduce waste because you only pull and cut what the job calls for.

The 2-3/4 inch width is a useful size for controlled hand sanding and narrow-format sanding tasks. It is wide enough to cover material efficiently, but still easy to manage on trim, body filler, primers, edges, and smaller panels. The full 10-yard roll gives you enough material for repeated use in a shop, collision repair setting, woodworking space, or general finishing workflow.

Based on the available product data, this Mirka abrasive roll is suited for a broad mix of materials including aluminum, hardwood, mild steel, stainless steel, plastics, primer, lacquer, plaster, putty, body filler, veneer, chipboard, solid surface materials, and paint removal or paint sanding applications. That kind of range is what makes a fine abrasive roll like this useful to keep on hand. It can move from woodworking to metal prep to finish repair without needing a different abrasive for every small task.

If you are a painter, finisher, body shop tech, cabinet installer, remodeler, or serious DIY user who sands a lot of different materials, this is the kind of consumable that earns its place fast. The Mirka 9A-570-240 Abranet 2-3/4″ x 10yd Mesh Grip Roll is best for users who want a fine sanding roll they can size to the job, keep stocked in the shop, and use across multiple surface-prep steps.

Mirka 9A-570-240 Abranet 2-3/4″ x 10yd Mesh Grip Roll is the kind of shop consumable you buy once, then wonder why you waited

If you do finish prep regularly, this is a smart abrasive roll size and grit to keep on the bench.

• Who it’s for: Painters, body shop techs, woodworkers, remodelers, and serious DIY users who need fine sanding material they can cut to fit the task.
• Why it stands out: The mesh-backed Abranet format and 10-yard roll give you flexibility that standard pre-cut sheets do not.
• Worth knowing: This is a fine 240 grit roll, so think surface prep and smoothing, not aggressive material removal.

• What grit is this abrasive roll? It is 240 grit, which is considered a fine grit for smoothing and finish prep.
• What is the size of the roll? The roll is 2-3/4 inches wide and 10 yards long, which is also listed as 30 feet of material.
• What abrasive material does it use? It uses aluminum oxide abrasive on a polyamide mesh backing.
• What materials can it be used on? Product data lists compatibility with materials such as hardwood, aluminum, mild steel, stainless steel, plastics, primer, lacquer, plaster, putty, body filler, veneer, and paint surfaces.