Mirka Abranet 3 x 9-in. P80 Mesh Sanding Sheet 10-Pack Hook and Loop Abrasive Sheets (9A-175-080RP)

Mirka Abranet Mesh Grip Sheet 3 x 9 in. P80 Grit 10-Pack is a rectangular mesh sanding sheet for hand sanding and machine-assisted surface prep. This is a sanding sheet designed for dust-reduced sanding, surface preparation, and material removal on wood, fillers, paint, plastic, and metal. Model number 9A-175-080RP. If you need an abrasive that cuts fast without loading up the way traditional paper often does, this one is built for that job.

The big advantage here is the Abranet mesh construction. Instead of relying on a few dust holes, the whole sheet has an open structure that lets sanding dust move through the abrasive. When used with a vacuum-capable sander, that helps keep the abrasive cutting instead of skating over packed dust. On the bench or in the shop, that usually means cleaner work, better visibility on the surface, and fewer sheet changes during longer sanding sessions.

The P80 grit is on the coarse side, which makes it a practical choice for early-stage prep work. It is well suited for knocking down filler, leveling rough surfaces, stripping back coatings, and getting wood or metal ready for the next sanding step. If your goal is final finish sanding, this is too aggressive. If your goal is removing material efficiently and moving the job forward, this grit makes sense.

Mirka uses aluminum oxide abrasive on a durable mesh backing, which matters because this type of sheet is expected to keep working even when sanding dusty materials. The mesh backing also gives the sheet flexibility that helps when working by hand with a sanding block. Compared to conventional solid-back sheets, this style is less likely to clog quickly, especially on fillers, primers, and painted surfaces.

Attachment is straightforward thanks to the grip-style hook and loop backing. That makes changes quicker and helps keep the sheet planted on the pad or block instead of shifting around during use. For anyone doing repeated sanding steps, fast swap-outs are a real time saver. It also makes this 10-pack a practical shop consumable rather than a one-off specialty item.

This Mirka sanding abrasive is a good fit for painters, body shop work, woodworking, remodeling, and serious DIY surface prep. It also works well for anyone trying to keep airborne dust down while sanding in a tighter workspace. If you already use a sanding block or vacuum-assisted sander and want cleaner, more efficient sanding sheets for prep work, this is the kind of abrasive worth stepping up to.

Mirka Abranet Mesh Grip Sheet 3 x 9 in. P80 Grit 10-Pack keeps prep work moving

This is a smart buy for anyone tired of loaded-up sandpaper slowing down surface prep.

• Who it’s for: Painters, woodworkers, body shops, remodelers, and serious DIY users doing coarse sanding and prep work.
• Why it stands out: The mesh design is the real advantage here. Better dust flow usually means longer usable life and more consistent cutting than standard sheets.
• Worth knowing: P80 is a rough grit, so think removal and leveling, not finish sanding. Make sure your block or pad is set up for 3 x 9 in. hook and loop sheets.

• What materials can this sanding sheet be used on? Source data supports use on wood, fillers, paint, plastic, and metal.
• Is this a fine finishing grit? No. P80 is a coarse grit intended for material removal, leveling, and surface preparation before moving to finer abrasives.
• Can it be used for dust-reduced sanding? Yes. The mesh backing is designed to support dust extraction, especially when paired with a vacuum-capable sanding setup.
• What does it fit? It is a 3 x 9 in. hook and loop mesh grip sheet and is listed as compatible with a sanding block.