Key Features
Overview
The Mirka DEXOS 1217X M HEPA Dust Extractor, Model Number DE-1217X-AFCH, is a compact professional dust extractor built for sanding environments where clean airflow, mobility, and reliable dust control matter. This is a HEPA dust extractor designed for professional sanding dust control. If you run Mirka sanders in a body shop, cabinet shop, finishing room, or tight jobsite setup, this unit is built to be part of the system rather than just acting like a generic wet/dry vacuum.
Its 17-liter, or 4.5-gallon, container size hits a practical middle ground. You get enough capacity for real work without dragging around a full-size extractor that eats up floor space. The compact footprint and 28.7-pound weight make it easier to move between workstations, load into a van, or keep close to the tool while sanding. For crews that work in smaller rooms, around finished surfaces, or in packed shops, that size is a real advantage.
Performance is built around a brushless 1,100-watt motor with adjustable suction and published airflow up to 89 CFM. In plain terms, that means the extractor can be tuned to the job instead of pulling too hard on a sander or not hard enough when dust load increases. Pair that with automatic filter cleaning, and you get more consistent extraction over longer sanding sessions. That helps protect finish quality, keeps abrasives working better, and reduces the drop-off you feel when filters start loading up.
Filtration is one of the big reasons someone buys this class of extractor in the first place. The unit is Dust Class M and uses a HEPA filter, with source data stating 99.9% dust retention and 99% HEPA filtration depending on source wording. Either way, the point is the same: this is built for controlled collection of fine dust in professional environments, not just sweeping up chips off the floor. Mirka also states that the extractor meets OSHA 29 CFR 1926.1153 workplace safety requirements when used with compliant tools and work practices, which matters for shops and jobsites where dust compliance is not optional.
Jobsite practicality is clearly part of the design. The unit supports both wet and dry use, has built-in storage for the included 13-foot anti-static hose, and includes two integrated power outlets with AutoStart functionality for connected electric tools. That kind of setup helps streamline sanding workflow because the extractor and tool work together instead of forcing you to manage separate starts and stops. The anti-static hose is especially relevant in sanding applications where fine dust management and smooth tool movement both matter.
The smart features are not just there for show. Bluetooth connectivity to the myMirka app gives you access to suction adjustment, airflow monitoring, filter cleaning configuration, and firmware updates. For users already invested in Mirka’s sanding ecosystem, that is a useful way to dial in performance for different materials, abrasives, and dust loads without trial and error.
Compatibility is another strong point. The included hose is purpose-built for use with Mirka DEROS II and DEOS II sanders, sold separately, so the extractor fits into a dedicated finishing setup instead of being a one-off purchase. It is also compatible with Mirka cases, which is helpful for organized transport and storage when your setup moves between shop and site.
Who should buy it? This extractor makes the most sense for serious sanding work, especially automotive refinishing, cabinetry, woodworking, and other finish-sensitive jobs where dust control directly affects results. If you want a general cleanup vacuum for rough construction debris, this is more specialized than you need. If you want a compact M-class HEPA dust extractor built to work with professional Mirka sanders and keep airflow stable through real production sanding, this is the right kind of machine.
Built for Controlled Sanding Extraction
This Mirka dust extractor is set up around sanding workflow, not just cleanup. The included anti-static hose, compact body, and M-class HEPA filtration make it a better fit for finish work where airborne dust and steady suction actually affect the result.
- 17-liter, 4.5-gallon capacity balances portability and usable collection volume
- Suitable for both dry and wet use
Quick Access to Controls
Fine-tuning suction matters with sanders. Too much pull can make a tool feel sticky on the surface, and too little leaves dust behind. This setup gives you better control so the extractor works with the tool instead of fighting it.
- Adjustable suction to match material, abrasive, and dust load
- Bluetooth connectivity supports control and monitoring through the myMirka app
Compact Body, Jobsite-Ready Layout
Mobility is a real selling point here. The body stays compact enough for crowded work areas, while built-in hose storage and a corded layout keep the setup organized when moving from station to station.
- Built-in storage for the included 13 foot hose
- Measures 19 in. long x 13 in. wide x 19 in. high
What’s in the Box
- (1) Mirka DEXOS 1217X 17L M-Class HEPA Dust Extractor
- (1) 13 ft. (4 m) Anti-Static Hose
- (1) Dust Bag, installed
- (1) HEPA Filter, installed
- (1) Power Cord
Mirka sanders and other connected tools are sold separately.
Key Specifications
| Capacity | 17 L / 4.5 gal |
|---|---|
| Motor Power | 1,100 W |
| Airflow | 89 CFM |
| Voltage (V) | 110 V |
| Power Source | Corded Electric |
| Weight (lbs) | 28.7 lbs |
| Dimensions | 19 in. L x 13 in. W x 19 in. H |
| Dust Class | M-Class with HEPA filtration |
Compatibility
Built For
Pro Tip
When you switch abrasives or move from flat sanding to edge work, back the suction down before you start. On a dedicated sanding extractor like this one, a small airflow adjustment can make the sander track smoother and leave a cleaner surface.
Tool Nut’s Take
Mirka DEXOS 1217X M HEPA Dust Extractor for Finish-Focused Pros
This is the kind of extractor you buy when dust control is part of the job, not an afterthought.
- Who it’s for: Pros running Mirka sanding systems in automotive refinishing, cabinetry, woodworking, and other finish-critical work.
- Why it stands out: You get M-class HEPA filtration, automatic filter cleaning, app-based control, wet/dry capability, and a compact 17-liter body that is easier to live with than a bulky shop vac.
- Worth knowing: This is a specialized sanding extraction system, not a catch-all cleanup vacuum. If that is what you need, it makes a lot of sense. If you just want to suck up rough jobsite debris, it is more machine than necessary in the wrong direction.
Common Questions
- Is this dust extractor for dry use only? No. Source data states it is suitable for both dry and wet use.
- Does it support connected power tools? Yes. Mirka states it has two integrated power outlets with AutoStart functionality for electric tools.
- Can it connect with the myMirka app? Yes. It has Bluetooth connectivity for app-based control and monitoring.
- What kind of filtration does it use? It is an M-class dust extractor with a HEPA filter for professional dust control.
Reviews
There are no reviews yet.