Key Features
Overview
Mirka Galaxy Perforated Sanding Roll 2.75” x 33.5′ Grit 100 is a premium abrasive roll for surface prep and finish sanding across wood, metal, epoxy resin, gelcoat, lacquer, and stainless steel applications. This is a perforated sanding roll designed for hand sanding and sanding block work where you want fast cutting, clean dust flow, and easy tear-off sheet sizing. Model Number: FY-570-100.
The main advantage here is the combination of ceramic alumina abrasive and Mirka’s self-sharpening grain behavior. In plain terms, the grit keeps exposing fresh cutting edges as it wears, so the sheet keeps working instead of going dull too quickly. For anyone sanding larger surfaces or doing repeated prep cycles, that matters because it helps maintain a more even scratch pattern and reduces the number of sheets you burn through.
The 2.75-inch width and 33.5-foot roll format make this a practical choice for shops and serious DIY users who do not want to sort through stacks of loose cut sheets. The roll is perforated every 2.75 inches, giving you 146 sheets per roll. That makes it easy to tear off consistent pieces for smaller blocks or longer hand sanding blocks without guessing at size every time.
Dust management is a big part of why this abrasive stands out. The perforated pattern is built for sanding blocks that use hole patterns to move dust away from the work surface. Mirka also calls out a non-clogging anti-adhesive coating, which is important when you are working on materials that tend to load paper fast, such as finishes, resin, or coated surfaces. Cleaner abrasive usually means a smoother result and less heat buildup on the workpiece.
From a job-use standpoint, Grit 100 sits in a useful range for material removal and surface prep before moving to finer sanding steps. It is coarse enough to cut efficiently but still controlled enough for leveling and preparation work where you need to keep the surface manageable for follow-up grits. If you are shaping filler, prepping wood, knocking down cured resin, or refining a coated surface before the next stage, this grit makes sense.
This Mirka sanding sheet roll is made to work with 2.75-inch wide sanding blocks and is specifically noted as suitable for varying block lengths, including 5-inch, 8-inch, and 16-inch formats. That gives it flexibility for bench work, panel prep, marine finishing, bodywork, and general hand sanding where you want the control of a block but the convenience of roll-fed abrasive.
Who should buy it? This is a smart pick for painters, woodworkers, marine finishers, auto body users, finish carpenters, and anyone doing regular hand sanding with a dust-ready block. If you need a basic bargain sandpaper roll, this is more product than you need. If you care about cut quality, longer abrasive life, and cleaner sanding on demanding materials, this is the kind of abrasive worth stepping up to.
Consistent Sheets, Less Waste
The perforated format gives you repeatable sheet sizing without cutting every piece by hand. That keeps prep faster and helps you use the right amount of abrasive for the block instead of wasting material.
- Roll width: 2.75 in
- Roll length: 33.5 ft with perforations every 2.75 in
- 146 sheets per roll for steady shop use
Built to Keep Cutting
Mirka’s ceramic alumina abrasive is meant for users who need the grit to stay productive over longer sanding sessions. The self-sharpening grain action helps maintain cut rate, especially on materials that can wear out ordinary abrasive fast.
- Ceramic alumina abrasive for aggressive, lasting cut
- Non-clogging anti-adhesive coating helps extend usable life
- Suitable for wood, metal, epoxy resin, gelcoat, lacquer, and stainless steel
Fits Common Hand Blocks
This roll is aimed at users working with 2.75-inch wide hand blocks, including longer block formats where pre-cut sheets are usually a hassle. It is a good setup when you want one abrasive roll that can cover different block lengths in the shop.
- Compatible with sanding blocks
- Designed for 5 in, 8 in, and 16 in block lengths
- Hook and loop format noted in the product data
What’s in the Box
- (1) Mirka Galaxy perforated sanding roll
- 146 perforated sanding sheets per roll
Key Specifications
| Model Number | FY-570-100 |
|---|---|
| Grit | 100 |
| Material | Ceramic Alumina |
| Roll Width | 2.75 in |
| Roll Length | 33.5 ft |
| Sheet Size | 2.75 in x 2.75 in |
| Sheet Count | 146 |
| Compatible Device | Sanding Block |
Compatibility
Built For
Pro Tip
If you use multiple hand block lengths in the same shop, keep this 2.75-inch perforated roll at the bench and tear only what the block needs. It is a simple way to cut waste and keep your scratch pattern more consistent from one job to the next.
Tool Nut’s Take
Mirka Galaxy Perforated Sanding Roll 2.75” x 33.5′ Grit 100 is the smart buy for serious hand sanding
If you do enough sanding to notice when cheap paper quits early, this Mirka roll makes a lot of sense.
- Who it’s for: Pros and detail-focused DIY users doing regular hand sanding on wood, coatings, resin, gelcoat, stainless steel, or metal.
- Why it stands out: The ceramic grain, non-clogging design, and perforated roll format solve three real problems at once: cut speed, abrasive life, and easy sizing for sanding blocks.
- Worth knowing: This is a sanding block abrasive, not a universal fit sheet for every machine. Make sure your setup uses 2.75-inch wide abrasive before you stock up.
Common Questions
- What grit is this sanding roll? It is Grit 100.
- What materials can it be used on? Source data lists epoxy resin, gelcoat, lacquer, stainless steel, wood, and metal.
- How many sheets are in the roll? The roll provides 146 perforated sheets.
- What tools is it made for? It is designed for sanding blocks and 2.75-inch wide hand sanding setups, including 5-inch, 8-inch, and 16-inch block lengths.
Reviews
There are no reviews yet.