Key Features
Overview
The Mirka Galaxy 5 in Multifit Grip Sanding Disc, Model FY-5MF-040, is a 5-inch hook and loop abrasive disc made for power sanding. This is a sanding disc designed for fast material removal on wood, metal, epoxy resin, and other soft and hard materials. In this 40 grit version, it is aimed at the early stage of surface prep where you need an extra coarse cut, not a finish-ready scratch pattern.
What matters here is the abrasive itself. Mirka uses ceramic alumina grain with a self-sharpening design, which means the grain keeps breaking in a way that exposes fresh cutting edges during use. On the job, that translates to a disc that keeps cutting instead of glazing over too quickly. If you are sanding heavy coatings, leveling uneven surfaces, or removing material from tough workpieces, that kind of consistency saves time and reduces wasted discs.
The Galaxy line is also built around a non-clogging, anti-adhesive approach. That matters when you are sanding materials that tend to load up paper fast. Less clogging means better cut quality, less heat, and fewer disc changes. For anyone doing repeated surface prep, that is the difference between steady production and constantly stopping to swap abrasives.
Mirka’s Multifit hole pattern is one of the most practical parts of this product. Instead of forcing you into one exact hole layout, the universal pattern is meant to work without careful alignment on compatible 5-inch sanding setups. That makes disc changes quicker and helps with dust extraction across a wider range of tools. If you run more than one sander in the shop, or just do not want to fuss with lining up holes every time, this is a real advantage.
Physically, these are 5-inch round hook and loop discs with a listed thickness of about 0.15 inches and a pack count of 50. The hook and loop backing gives you quick changes between grits, which matters when you are working through a sanding sequence. The 40 grit rating puts this disc firmly in the aggressive prep category, so it is best used where speed and removal rate matter more than surface finish.
The Mirka Galaxy 5 in Multifit Grip Sanding Disc is a strong fit for body shops, woodworkers, finish prep crews, metal fabricators, and serious DIY users who want a premium abrasive for coarse sanding. If your goal is rapid removal with better disc life and less clogging, this is the right kind of abrasive. If you are already at the refining or finishing stage, you will want to step up to a finer grit in the same system.
Built for Fast Surface Prep
This 40 grit disc is for the part of the job where you need to move material, not baby the surface. It is a smart choice for stripping, leveling, and knocking down rough stock before finer sanding steps.
- Extra coarse 40 grit for aggressive removal
- 5-inch disc format fits common random orbital sanding setups
Stays Cutting Longer
Ceramic alumina grain and Mirka’s self-sharpening design help the abrasive stay productive through more of the disc’s life. That means less time fighting dull paper and more time actually sanding.
- Ceramic alumina abrasive for sustained cut rate
- Non-clogging design helps reduce loading during sanding
Easier Fit Across Different Sanders
The Multifit pattern is made to reduce alignment hassle when changing discs. Paired with hook and loop backing, it gives you faster swaps and practical dust extraction compatibility on the right 5-inch setup.
- Universal Multifit hole layout
- Hook and loop backing for quick disc changes
What’s in the Box
- (50) Mirka Galaxy 5 in Multifit Grip Sanding Discs, 40 Grit
Key Specifications
| Disc Diameter | 5 in |
|---|---|
| Grit | 40 |
| Grit Type | Extra Coarse |
| Abrasive Material | Ceramic Alumina |
| Backing Type | Hook and Loop Grip |
| Hole Pattern | Multifit Universal Pattern |
| Construction Type | Coated |
| Pack Quantity | 50 Discs |
Compatibility
Built For
Pro Tip
Use this 40 grit Mirka Galaxy disc for the first cut only, then step through finer grits instead of trying to force one disc to do the whole job. That keeps removal fast and makes it easier to clean up the scratch pattern in the next pass.
Tool Nut’s Take
Mirka Galaxy 5 in Multifit Grip Sanding Disc Gets the Heavy Work Started Right
If you want a premium sanding disc that cuts hard, resists loading, and saves some aggravation on hole alignment, this one earns its keep.
- Who it’s for: Anyone doing aggressive surface prep on wood, metal, or epoxy resin with a compatible 5-inch hook and loop sander.
- Why it stands out: The ceramic grain stays sharp, the Multifit pattern is practical, and the non-clogging design makes a real difference during coarse sanding.
- Worth knowing: This is 40 grit, so it is meant for removal and prep work, not finish sanding. Plan on following with finer discs if surface quality matters.
Common Questions
- What kind of sanding is 40 grit best for? 40 grit is extra coarse and best for aggressive material removal, heavy surface prep, and early sanding stages.
- What is the disc material? The abrasive material is ceramic alumina.
- Does this disc use hook and loop backing? Yes. It uses a hook and loop grip backing for quick attachment and removal.
- What materials can this be used on? Source data lists it as suitable for sanding wood, metal, epoxy resin, and both soft and hard materials.
Reviews
There are no reviews yet.