Key Features
Overview
The Mirka Galaxy FY-612-400 5 Inch Sanding Discs are a 400-grit abrasive disc pack built for fine surface preparation and finish sanding across wood, metal, paint, fillers, and composite materials. This is a sanding disc designed for surface preparation and finishing with compatible 5 inch hook and loop random orbital sanders. Model Number: FY-612-400. If you need a finer grit abrasive that still cuts cleanly and stays working instead of glazing over too fast, this is the kind of disc you buy on purpose.
What matters here is the abrasive. Mirka uses ceramic alumina grain, and the big benefit is that it keeps exposing fresh cutting edges as the disc wears. On the job, that translates to steadier cutting action and less drop-off as you work through a stack of parts or a larger repair area. In plain terms, it helps the disc stay productive longer instead of feeling sharp for a minute and tired after that.
The 400-grit rating makes this disc a smart pick when the job is moving past heavy stock removal and into refinement. It is suited to smoothing primers, paint, epoxy resin, fillers, and finished surfaces where control matters more than brute force. For woodworking, that can mean refining hardwood, softwood, veneer, chipboard, or medium density fiberboard before the next coat. For automotive and finish work, it fits the prep stage where you want a consistent scratch pattern without going too aggressive.
Mirka also builds in an anti-clog coating, which matters more than it sounds. Materials like paint, primer, resin, gel coat, and body filler can load a disc fast, and once that happens, cut quality drops and heat goes up. The anti-clog design helps the abrasive keep working longer during extended sanding sessions, especially on coated or resin-heavy surfaces where ordinary discs can pack up early.
This version uses a no-hole face and hook and loop backing. The hook and loop side makes disc changes quick and secure, which is what most users want on a 5 inch random orbital sander. The no-hole layout gives full abrasive coverage and removes the need to line up holes before you get back to work. That is a practical advantage when speed and simplicity matter more than fussing with alignment.
Material range is one of the strong points of this Mirka abrasive. Based on the available product data, it is intended for wood, hardwood, soft or resinous wood, metal, stainless steel, mild steel, non-ferrous metal, composites, plastics, glass fiber, solid surface materials, fillers, epoxy resin, lacquers, paint, and primers. That makes it useful for mixed-material shops where one sanding disc needs to move from cabinet parts to refinishing work to light metal prep without feeling out of place.
Who should buy it? Pros and serious DIY users doing woodworking, automotive refinishing, composite work, paint prep, or general finish sanding will get the most out of it. If you run through a lot of 5 inch sanding discs and care about cut consistency, disc life, and quick changeovers, this pack makes sense. If you need coarse stock removal, look to a lower grit. But if your goal is cleaner prep work and a more refined finish step, 400 grit is right in the zone.
Fine Surface Prep Without Fast Loading
When you are sanding primers, fillers, paint, or resin-based materials, disc loading is what slows the whole job down. The anti-clog coating on this sanding disc helps maintain cut quality longer so you can keep moving instead of swapping abrasives every few minutes.
- 400 grit is suited to finer sanding, finish prep, and smoothing work
- Anti-clog coating helps reduce abrasive build-up during longer sanding sessions
Built for Fast Disc Changes
A good abrasive should not waste your time between passes. The hook and loop backing gives you quick attachment and removal on compatible 5 inch sanders, while the no-hole disc face keeps setup simple because there is no hole pattern to line up.
- Hook and loop backing supports secure attachment and fast swaps
- No-hole design provides full abrasive coverage across the disc face
One Disc for Mixed-Material Work
This Mirka abrasive is made for shops that do more than one kind of work. It is suitable for wood, metal, composites, fillers, paints, primers, and epoxy resin, so you can keep the same disc line in rotation across different prep and finishing jobs.
- Ceramic alumina abrasive is designed for fast, consistent cutting
- Useful for woodworking, automotive prep, refinishing, and general surface preparation
What’s in the Box
- (50) Mirka Galaxy 5 inch sanding discs, grit 400
- No-hole design
- Hook and loop backing
Key Specifications
| Brand | Mirka |
|---|---|
| Model | FY-612-400 |
| Disc Diameter | 5 in |
| Grit | 400 |
| Abrasive Material | Ceramic Alumina |
| Backing Type | Hook and Loop |
| Hole Pattern | No Hole |
| Pack Quantity | 50 Count |
| Thickness | 0.15 in |
| Made In | Finland |
Compatibility
Built For
Tool Nut’s Take
Mirka Galaxy FY-612-400 5 Inch Sanding Discs are a smart buy for clean prep work
If you want a finer grit sanding disc that stays cutting, swaps fast, and handles more than one material in the shop, this pack checks the right boxes.
- Who it’s for: Woodworkers, finish guys, automotive refinishers, and serious DIY users running 5 inch hook and loop random orbital sanders.
- Why it stands out: Ceramic alumina grain, anti-clog performance, and a no-hole hook and loop setup make it practical for real production work.
- Worth knowing: This is a 400-grit disc, so think refinement and finish prep, not aggressive material removal.
Common Questions
- What tool type is this abrasive made for? It is designed for compatible 5 inch hook and loop random orbital sanders.
- What materials can it sand? The product data lists wood, metal, stainless steel, non-ferrous metal, composites, plastics, fillers, epoxy resin, paint, primers, gel coat, and similar surface-prep materials.
- Is this a perforated sanding disc? No. This is a no-hole sanding disc.
- What grit is this pack? This model is 400 grit.
Reviews
There are no reviews yet.