Key Features
Overview
The Mirka Dust Extractor 1230 HEPA PC 120V is a HEPA dust extractor built for sanding dust collection, shop cleanup, and cleaner indoor work. This is a dust extractor designed for dust-free sanding and tool-connected cleanup. Model Number: DE-1230-PC. If you run Mirka sanders, pneumatic tools, or hand-sanding blocks and want a cleaner setup that is easier on both the workspace and the operator, this is the kind of vacuum system that makes a real difference.
On paper, the important numbers are a 1000-watt motor, 157 CFM air volume, 250 mbar vacuum, and 4500 l/min airflow. On the job, that translates to strong pickup at the tool and better control over fine dust before it lands on finished surfaces, hangs in the air, or loads up your work area. For sanding, that matters more than raw shop-vac noise and brute force. The whole point here is steady extraction that supports finish quality and keeps cleanup from turning into a second job.
Mirka also built this unit around day-to-day usability. The flat filter is easy to access, the top gives you storage space, and the large rear wheels help the extractor move over thresholds and uneven floors without constantly getting hung up. That may sound small until you’ve dragged a vacuum around trim work, cabinet installs, or bodywork bays all day. The hose storage is another detail that keeps things under control instead of leaving you with a tangled mess at the end of the shift.
The Push & Clean filter-cleaning setup is there for a reason. Fine sanding dust can choke airflow fast, and when airflow drops, tool performance and dust capture drop with it. A system that helps keep the filter clear means more consistent suction over longer work sessions. Since this unit is HEPA certified and built with three layers of dust protection, it is aimed at users who care about controlling fine particulate, not just sweeping up chips.
Noise is another place this extractor separates itself from a lot of ordinary shop vacs. Mirka lists it at 60 decibels, which is notably quieter than many comparable collectors. Combined with AutoStart, that makes it a better fit for interior remodeling, finish carpentry shops, auto refinish work, and any workspace where a screaming vac running nonstop gets old in a hurry. AutoStart also helps reduce unnecessary motor run time, which can help extend motor life.
Compatibility is a big reason to buy this model. It is designed to work as part of Mirka’s dust-free sanding system and is intended for use with Mirka electric tools, Mirka pneumatic tools, and Mirka ergonomic hand-sanding blocks. If you are already in that system, this extractor ties the whole setup together. If you are building a cleaner sanding workflow from scratch, it gives you the HEPA filtration, airflow, and container capacity to do it right.
Who should buy it? Pros who sand for a living or anyone doing serious finish work indoors. That includes painters, drywall finishers, woodworkers, cabinet installers, auto body techs, and remodelers who need better dust control than a basic shop vacuum can usually deliver. If you only need occasional rough cleanup, this is more machine than you need. If fine dust is part of your work every day, this is exactly the kind of upgrade that pays off in cleaner air, cleaner surfaces, and less wasted time.
Cleaner Sanding with HEPA Filtration
This extractor is built for the kind of fine dust that causes problems in finish work. HEPA certification and three layers of dust protection make it a strong fit for sanding setups where air quality and surface cleanliness matter.
- HEPA certified for fine dust capture
- Designed to be part of Mirka dust-free sanding systems
- Good fit for finish sanding, shop cleanup, and interior work
Keep Airflow Up Longer
Fine sanding dust loads filters fast. The accessible flat filter and Push & Clean system help you stay productive by keeping suction more consistent over longer runs.
- Push & Clean flat filter cleaning every 15 seconds
- Easily accessible flat filter for routine maintenance
- Built to support steady extraction during dust-heavy work
Set Up for Real Shop Use
The details on this unit are aimed at keeping the extractor easier to move, easier to manage, and easier to empty. That matters when the vacuum follows you from bay to bay or room to room all day.
- 8-gallon container for longer work between emptying
- Large wheels improve maneuverability on uneven floors
- Hose storage and flat top help keep the setup organized
What’s in the Box
- (1) Mirka Dust Extractor 1230 HEPA PC 120V
- (1) DE-FDB Fleece Dust Bag
- (1) DE-FLT Flat Filter
- (1) DE-HEPA HEPA Filter
Key Specifications
| Voltage (V) | 110/120 V |
|---|---|
| Motor Power (W) | 1000 W |
| Air Volume (CFM) | 157 CFM |
| Air Flow | 4500 l/min |
| Vacuum Pressure | 250 mbar |
| Capacity | 8 gal |
| Noise Level | 60 dB |
| Weight (lbs) | 32 lbs |
| Automatic Shut-Off | Yes |
| Made In | Finland |
Compatibility
Built For
Pro Tip
If you’re using this extractor for fine sanding all day, stay ahead of filter loading instead of waiting for suction to fall off. The Push & Clean system and easy filter access are there to keep airflow consistent, and using them regularly will help the tool side of your sanding setup work better too.
Warranty & Support
Tool Nut’s Take
Mirka Dust Extractor 1230 HEPA PC 120V for serious sanding cleanup
This is the kind of extractor that makes sense when dust control is part of the job, not an afterthought.
- Who it’s for: Pros and serious DIY users doing sanding, surface prep, finish work, or indoor remodeling where fine dust needs to stay under control.
- Why it stands out: HEPA filtration, quiet 60 dB operation, strong airflow, and system-focused compatibility with Mirka sanding tools make it more purpose-built than a basic shop vac.
- Worth knowing: This is best appreciated in a tool-connected dust collection setup. If you just need occasional rough debris pickup, it’s probably more extractor than you need.
Common Questions
- Is this a HEPA dust extractor? Yes. The product is listed as HEPA certified and includes a HEPA filter.
- What kind of work is it designed for? It is designed for dust-free sanding systems and is intended for use with Mirka electric tools, pneumatic tools, and ergonomic hand-sanding blocks.
- How much airflow does it produce? Mirka lists the extractor at 157 CFM with 4500 l/min airflow and 250 mbar vacuum.
- Is it loud compared to a typical shop vacuum? It is listed at 60 dB, which is quieter than many comparable collectors.
Reviews
There are no reviews yet.